ISIJ International · 2014 · 23 citations · 14 references
EngineeringMaterials EngineeringMining EngineeringMetallurgyMineral ProcessingSurface MiningGrain Size DistributionGrain-size AnalysisParticle SizeParticle-size ClassesPowder MetallurgyGranulationGranulation ProcessesGranule Size EffectsMoisture ContentMoisture Content EffectsParticle-size DistributionPre-treatmentSize Structure Variation
Together with the conventional granulation, a proposed pre-wetting granulation for two commercial sinter mixtures consisted of six different iron ores and other auxiliary materials has been investigated under controlled laboratory conditions. A method to describe the size variation of the granules between different granulation trials was proposed and studied in the granulation of this study. It is a method by drawing a cumulative undersized curve (CUS curve) and a differential cumulative undersized curve (Δ‑CUS curve) into one figure. The results indicated that (1) with more water available for granulation, more particles in a sinter raw mixture would behave as the layering fines in granules and the upper size for these layering fines would increase from 1 mm to 4.5 mm in conventional granulation; (2) compared to the results from conventional granulation, the granulation with pre-wetting treatment on iron ore fines resulted in a tighter particle size distribution and a higher permeability before ignition. At similar moisture content, more particles can be shifted into the layering fines in pre-wetting granulation than in conventional granulation; (3) Due to the preferential granule growth and the deformation of the granules, a further increase in pre-wetting degree (PWD) from 65% to 80% had little influence on the optimal permeability before ignition. Furthermore, a sinter mixture with more materials that are high in moisture absorption capacity would lead to higher optimum moisture content in granulation.
14
A. Formoso, A. Moro, G. Fernández Pello et al. · Ironmaking & Steelmaking Processes Products and Applications · 2003 · 58 citations
Engineering, Manufacturing Engineering, Mining Engineering +16