Nanotechnology · 2013 · 33 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceMicrofabricationNanomaterialsOptical Materials3D PrintingFabrication MaterialsPolymer Thin FilmsSoft LithographyFabricationLight ExtractionLight Extraction EfficiencyPolydimethylsiloxane Device FabricationSiliconThree-dimensional Nanostructuring
In spite of the fact that the fabrication process of three-dimensional nano-structures is complicated and expensive, it can be applied to a range of devices to increase their efficiency and sensitivity. Simple and inexpensive fabrication of three-dimensional nano-structures is necessary. In this study, reverse imprint lithography (RIL) with UV-curable benzylmethacrylate, methacryloxypropyl terminated poly-dimethylsiloxane (M-PDMS) resin and ZnO-nano-particle-dispersed resin was used to fabricate three-dimensional nano-structures.UV-curable resins were placed between a silicon stamp and a PVA transfer template, followed by a UV curing process. Then, the silicon stamp was detached and a 2D pattern layer was transferred to the substrate using diluted UV-curable glue. Consequently, three-dimensional nano-structures were formed by stacking the two-dimensional nano-patterned layers. RIL was applied to a light-emitting diode (LED) to evaluate the optical effects of a nano-patterned layer. As a result, the light extraction of the patterned LED was increased by about 12% compared to an unpatterned LED.
37
Younan Xia, George M. Whitesides · Annual Review of Materials Science · 1998 · 4.6K citations
A picogram- and nanometre-scale photonic-crystal optomechanical cavity
Matt Eichenfield, Ryan M. Camacho, Jasper Fuk‐Woo Chan et al. · Nature · 2009 · 695 citations · Full text