Enhanced Analysis and Design Method of Concurrent Dual-Band Power Amplifiers With Intermodulation Impedance Tuning

Xiaofan Chen, Wenhua Chen, Fadhel M. Ghannouchi, Zhenghe Feng, Yuanan Liu

IEEE Transactions on Microwave Theory and Techniques · 2013 · 68 citations · 18 references

Concepts

TL;DR

The study introduces intermodulation impedance tuning to analyze and design concurrent dual‑band power amplifiers, proposing new operation modes and a Class‑AB implementation for LTE bands. The authors derive the theoretical performance of the proposed modes, discuss overdrive effects, and present a structure for implementing IM impedance tuning in dual‑band PAs. Experimental results validate the theory, showing a Class‑AB dual‑band PA with >36.1 % power‑added efficiency, >34.3 dBm output, and 7 dB PAPR, surpassing prior dual‑band Doherty designs.

Abstract

The behavior of power amplifiers (PAs) driven by concurrent dual-band signals is analyzed theoretically in this paper. According to the analysis, the impedance matching at intermodulation (IM) frequency is very important for PAs working in concurrent mode. Based on the concept of IM impedance tuning, a family of new operation modes can be introduced, including concurrent Class-A, Class-AB, Class-B, and Class-C. The theoretical performance of these modes are derived and the overdrive effects of them are also discussed. A possible structure is proposed to implement the proposed IM impedance tuning, and a concurrent Class-AB dual-band example PA operating at 1.9-2.6-GHz long-term evolution (LTE) bands is demonstrated. Experimental results show good consistence with the theoretical analysis, and the concurrent Class-AB PA prototype exhibits higher than 36.1% power-added efficiency in concurrent mode when driven by 10- and 15-MHz LTE signals in two bands concurrently. To our best knowledge, this is the state-of-the-art efficiency performance of concurrent dual-band PAs, even higher than previously reported dual-band Doherty PAs. Additionally the proposed PA, which is fabricated using a 10-W GaN HEMT, can output more than 34.3-dBm power with a peak-to-average ratio of 7 dB in concurrent mode, showing a remarkable power utilization factor for concurrent dual-band PAs.

References

18