IEEE Journal of Quantum Electronics · 1982 · 14 citations · 26 references
EngineeringCommunicationElectrical EngineeringOptoelectronicsPhotonicsSemiconductor DevicesDevice CharacterizationFiber-optic CommunicationNoise In Semiconductor DevicesOptical AmplifiersOptical Communication SystemsReceiver SystemsHigh-speed TransmissionInput ImpedanceOptical Level MeasurementOptical ReceiversReceiver DesignReceiver NoiseReceiver SensitivitySingle-mode Operation
Sensitivity of a 1.3 μm Ge APD receiver was measured at data rates ranging from 100 Mbits/s to 2 Gbits/s, using a high-speed GaAs FET RZ driver, low-noise Si bipolar transistor (BIT) receiver amplifier, and a highly sensitive TD comparator. The required received optical level at a 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-9</sup> error rate was -31.9 dBm for 2 Gbits/s with a Ge APD/Si BIT front end having a 50 Ω input impedance. A Ge APD/ GaAs FET front end, with a 500 Ω input impedance, brought about 2 dB improvement at 100 Mbits/s, as compared with a Ge APD/Si BIT (50 Ω) front end. A coupling loss of 4 dB, achieved by a hemispherical microlens tipped on a single-mode fiber, and a low fiber loss of 0.57 dB/km, including splice loss, enabled 44.3 km single-mode fiber transmission at 2 Gbits/s. The 1.3 μm transmission system has a data rate repeater-spacing product of 88.6 (Gbit/s)km. Prospects of Gbit/s receiver sensitivity and the 2 Gbit/s transmission system, with more than 50 km repeater spacing, are also discussed.
26
Ultimate low-loss single-mode fibre at 1.55 μm
T. Miya, Y. Terunuma, T. Hosaka et al. · Electronics Letters · 1979 · 633 citations
Zero material dispersion in optical fibres
D.N. Payne, W.A. Gambling · Electronics Letters · 1975 · 284 citations
Natural Sciences, Materials Engineering, Materials Science +12