20:T4b1,Experiments have been conducted to show the effects of H 2 S, SO 2 , NO 2 and Cl 2 in simple and complex mixtures on several contact materials. The results have led to the use of two complex mixtures, with and without Cl 2 and containing 200 ppb each of H 2 S, SO 2 and NO 2 for industrial environment simulation. Acceleration factors were estimated to be on the order of 30-40 times at 30°C.21:T48e,The dependence of TiN/TiSi2 bilayer formation on Si by lamp annealing of Ti upon annealing temperature, ambients, and impurity in Si was investigated. In NH3 ambient, nitridation ratio on undoped Si at 680 and 800 °C is 40% and 25%, respectively. When annealing is performed in N2, the nitridation ratio of Ti is only about 25% at both 680 and 800 °C. The above dependence of nitridation ratio on annealing ambient is due to the difference in decomposition energy of gas molecules. The nitridation ratio increases on arsenic-implanted Si because of a retardation effect of the arsenic on the silicidation reaction. The bilayer formation process was applied to the AlSi contact metallization on the n+ diffused layer. From measurements on electrical characteristics of the AlSi/TiN/TiSi2/n+ Si contact system, the following results were obtained: (1) Contact resisitivity is 3.5–5.3×10−7 Ω cm2. (2) The TiN/TiSi2 contact electrode is thermally stable against Al. In particular, when the bilayer is formed in NH3 at comparatively lower temperature, its thermal stability is still further improved. This is due to the formation of the thicker surface TiN layer.

	Year	Citations

References