2006 · 36 citations · 5 references
EngineeringMechanical EngineeringPhysicsAcousticsActuatorsMicrofabricationMems ResonatorsMicrofluidic Device FabricationMicrofluidic DevicesMicrofluidicsAcoustic Droplet ManipulationAcoustic Lens DesignAcoustic LensingAcoustic MicrofluidicsAcoustofluidicsFrequency TuningResonant FrequencyResonant Mode Analysis
This paper describes a novel droplet ejector with an acoustic lens employing air-reflectors. The lens focuses the acoustic beams at the liquid surface, and facilitates uniform and consistent droplet ejections. This acoustic ejector requires no nozzle, nor heat for actuation, but uses a novel lens. When excited with RF pulses (7μs pulsewidth) of 18 MHz (corresponding to the fundamental thickness-mode resonant frequency), the ejector ejects uniform droplets of 70 μm in diameter at a rate up to 10 kHz. The ejector is integrated with reservoirs and channels on a single chip, and is shown to produce continuous and stable ejections without any liquid refilling or frequency tuning.
5
Nozzleless droplet formation with focused acoustic beams
Scott Elrod, B. Hadimioglu, B.T. Khuri-Yakub et al. · Journal of Applied Physics · 1989 · 221 citations
A low power, small, electrostatically-driven commercial inkjet head
S. Kamisuki, T. Hagata, C. Tezuka et al. · 2002 · 74 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +13
High-efficiency Fresnel acoustic lenses
B. Hadimioglu, Eric G. Rawson, R.E. Lujan et al. · 1993 · 51 citations
Natural Sciences, Physics, Acoustics +12