Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2005 · 19 citations · 20 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureMaterials CharacterizationThin FilmsAluminum OxidesIron OxidesMetal OxidesThin-film DepositionThin-film MaterialsX-ray DiffractionEpitaxial Film GrowthFilm Growth MechanismsFilm ThicknessLattice MismatchLattice Mismatch StrainMagnetron SputteringSynchrotron X-ray ScatteringX-ray Reflectivity
We investigated α-Fe2O3 (0001) film growth on α-Al2O3 (0001) using a laboratory-built dc faced magnetron sputtering system with x-ray diffraction, x-ray reflectivity, and atomic force microscopy (AFM). The films were deposited from iron targets at a growth rate of ∼6.3nm∕min in an ambient argon and oxygen mixture. The structural properties and quality of the α-Fe2O3 thin films were characterized using high-resolution synchrotron x-ray scattering. Films thinner than 16nm were to be found highly strained due to the large lattice mismatch between film and substrate of 5.8%. This strain was found to decrease as the film thickness increased, and most of the strain was released through surface modulation once the film thickness reached 20nm. The epitaxial relationships were found to be α-Fe2O3 [0001]‖α-Al2O3 [0001] in the out-of-plane direction. That the film and substrate display the in-plane alignment anticipated for the epitaxy of isomorphous materials was established by verifying that the [112¯0] directions of film and substrate were coincident. X-ray reflectivity and AFM were used to show that layer-by-layer growth of α-Fe2O3 (0001) occurs up to a thickness of 11nm despite the large lattice mismatch.
20
Surface Studies of Solids by Total Reflection of X-Rays
L. G. Parratt · Physical Review · 1954 · 5.1K citations
Paul R. Berger, Kevin H. Chang, P. Bhattacharya et al. · Applied Physics Letters · 1988 · 249 citations · Full text