The mechanical properties of thin polymer film for nanoimprinting lithography by nanoindentation

H.J. Lee, Shin Hur, Seungwoo Han, J.H. Kim, Chung-Seog Oh, Seong-Hyun Ko

2004 · 11 citations · 2 references

Concepts

Abstract

Two thin polymer films (mr-I-8030 and mr-I-9030) for nanoimprinting lithography are coated on 4 inches silicon wafers. Nanoindentation tests are performed to measure the mechanical properties, Young's modulus and hardness, of these thin films having the thicknesses of around 130, 200, and 400 nm. The primary elastic modulus and the viscoelastic properties are derived from the creep. The modulus values obtained by these methods are compared. The plastic deformation of these films after indentation is analyzed by using a scanning probe microscope.

References

2