IOP Conference Series Materials Science and Engineering · 2015 · 22 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsPhase TransformationsSolidificationAlloysKinetics Of Phase TransformationsPeritectic TransformationsPhase Transformation During SolidificationSolidification KineticsTransformation MechanismsPeritectic DecompositionPeritectic Reaction KineticsPhase Transformation During DeformationPhase Transformations In Iron AlloysTransformation KineticsTransformation StagesUndercooled SolidificationVelocity
In Fe-C alloys, it has been considered that the peritectic reaction occurs during solidification. Recently, the massive-like transformation, in which δ phase undercooled below the peritectic temperature transforms into γ phase, has been observed by X-ray imaging. It is of interest to know how the δ phase transforms into the γ phase, because the transformation is related to deformation of solidifying shell. Time-resolved and in-situ X-ray imaging with frame rate up to 500 fps was performed to know the δ/γ interface motion in the massive-like transformation in Fe-0.3C-0.6Mn-0.3Si alloys (mass%). The moving velocity of the δ/γ interface locally fluctuated. The average velocity ranged from several mm/s to 200 mm/s. However, no relationship between the moving velocity and the undercooling from the peritectic temperature was observed. The interface was not planar and the morphology continuously changed. The results showed that the stress / strain induced though the transformation from the δ phase to the γ phase in the steel solidification was not simply explained by the conventional peritectic reaction.
10
Development of X-ray Imaging for Observing Solidification of Carbon Steels
Hideyuki Yasuda, Tomoya Nagira, Masato Yoshiya et al. · ISIJ International · 2011 · 106 citations · Full text
Direct observation of deformation in semi-solid carbon steel
Tomoya Nagira, C.M. Gourlay, A. Sugiyama et al. · Scripta Materialia · 2011 · 82 citations
Natural Sciences, Materials Engineering, Materials Science +14