1997 · 15 citations · 12 references
Natural SciencesMaterials ScienceCorrosion ScienceHydrogeologyWater Resources EngineeringCorrosion EngineeringCorrosion EvaluationCorrosion In Nuclear SystemsCorrosion MechanismsCorrosion TestingCorrosion-resistant MaterialsAluminum Alloy CorrosionAluminum AlloysCorrosion Of Aluminum AlloysCorrosion Of Fuel CladdingCorrosion Of Nuclear FuelsCorrosion PotentialCyclic Polarization TestingPitting Susceptibility
Abstract Aluminum-clad spent nuclear fuels are being stored in water in the Receiving Basin for Off-site Fuels (RBOF) and the reactor disassembly (cooling) basins at the Savannah River Site (SRS). Experience shows that fuels stored in water are subject to rapid pitting corrosion if the water quality is poor. Upgrade projects and actions, including those to improve water quality, were recently undertaken to upgrade the disassembly basins for extended storage. A technical strategy was developed for continued basin storage of aluminum-clad fuel assemblies. The strategy includes development and implementation of basin technical standards for water quality to minimize attack due to pitting corrosion over a desired storage period. In the absence of localized corrosion, only slow, general corrosion of the cladding would be expected. A laboratory corrosion program is being performed to provide the bases for technical standards by identifying the region of "aggressive" water qualities where existing oxide films would tend to break down and pits would initiate and remain active. Initial results from corrosion potential and cyclic polarization testing of aluminum alloys in various water chemistries have shown that low conductivity water (< 50 μS/cm) should not be aggressive to cause self-pitting corrosion. Initial results from tests of 8001 and 5052 aluminum and aluminum-10%uranium alloy indicate that a strong galvanic couple should not exist between the aluminum cladding materials and the aluminum-uranium fuel. Additional laboratory testing will include immersion testing to allow characterization of the growth rate of active pits to benchmark a kinetic model. This model will form the basis for a water quality technical standard and enable prediction of the life of aluminum-clad spent nuclear fuels in basin storage.
12
Localized Corrosion of Aluminum Alloys—A Review
R. T. Foley · CORROSION · 1986 · 361 citations
Natural Sciences, Materials Engineering, Materials Science +17