Materials Science and Engineering A · 2025 · 12 citations · 98 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsNanomaterialsAlloysConductive MaterialsElectrical ConductivityElectrical Properties Of CeramicsMetalsSilicon MaterialsAluminium AlloysElectrical Conductivity EnhancementElectrical PropertiesMechanical StrengthNanostructured ConductorsTensile StrengthThermomechanical PropertiesUltimate Tensile Strength
Hypoeutectic Al–Si alloys are promising candidates for novel Al conductor cables; however, their limited electrical conductivity (EC) and mechanical strength hinder their widespread industrial applications. This study investigates the influence of two thermomechanical processing routes—conventional (C-TMP) and modified (M-TMP)—on the microstructural evolution and the resulting enhancements in mechanical and electrical properties of hypoeutectic AA4043 Al alloy. The C-TMP method improved the ultimate tensile strength from 180.7 MPa to 289.8 MPa and slightly increased the EC from 50.1 to 51.4 % IACS, however, it still remained below the industrial requirement threshold of 52.5 % IACS. In contrast, the M-TMP method successfully overcame the strength-EC trade-off by achieving simultaneous improvements in both properties: the UTS reached 231.4 MPa, while the EC increased to 59.2 % IACS, which represent enhancements of 28.1 % and 18.2 %, respectively, over the as-rolled (AsR) rod condition. The substantial improvement in the EC was attributed to the depletion of solute Si from the Al matrix through the formation of Si nanoprecipitates during pre-annealing. Microstructural analysis of the M-TMP sample revealed the development of an ultrafine-grained (UFG) structure containing embedded Si nanoprecipitates, with a lower dislocation density compared to the C-TMP sample. The underlying mechanisms contributing to the strength-EC synergy are discussed using constitutive models, focusing on Si nanoprecipitates, dislocation density, and grain refinement. These results demonstrate that M-TMP effectively resolved the strength-EC trade-off and yielded a high-strength, high-EC Al-Si conductor that is suitable for advanced electrical wiring applications.
98
X-ray line broadening from filed aluminium and wolfram
G.K. Williamson, W H Hall · Acta Metallurgica · 1953 · 10.2K citations
The Cleavage Strength of Polycrystals
N. J. Petch · Alaska medicine · 1953 · 3.6K citations
Natural Sciences, Materials Engineering, Materials Science +12
The mechanism of plastic deformation of crystals. Part I.—Theoretical
Geoffrey Ingram Taylor · Proceedings of the Royal Society of London Series A Containing Papers of a Mathematical and Physical Character · 1934 · 2.4K citations · Full text
Natural Sciences, Materials Science, Mechanical Behavior Of Materials +16