Rare Metals · 2024 · 13 citations · 70 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyPhase TransformationsAlloysGrain Structure AnalysisGrain Structure FormationMetalsMicrostructure AnalysisPowder Bed FusionGrain Structure EffectsLaser Powder Bed FusionTensile StrengthThermal CyclingThermal Cycling EffectsThermal Cycling Testing
Abstract This study investigated the impact of thermal cycling effects on the microstructure and mechanical properties of IN738LC alloy manufactured by laser powder bed fusion, considering different volumetric energy densities (VEDs) and interlayer times (ILTs) as part of the experimental parameters. The results show that low VED and long ILT samples displayed superior quality, with an average grain size of 10.97 μm and relatively low strain accumulation level. In contrast, samples with high VED and long ILT exhibit increased cracking and porosity, the average grain size is 14.63 μm and present higher strain accumulation degree. The nano‐primary MC phase within the alloy transformed into a spherical secondary MC phase inside the grain and a polygonal secondary MC phase on the grain boundary. In the low VED and long ILT, the mean equivalent diameter (MED) of MC carbide within the grain and on the grain boundary was 63 and 140 nm, respectively, the tensile strength was 1072 ± 21 MPa. By contrast, for the high VED and long ILT, the MED of MC carbide in the grain and on the grain boundary were 47 and 105 nm, respectively, and the tensile strength was 794 ± 31 MPa. The tensile strength of high VED and long ILT decreased by 26% compared with low VED and long ILT.
70
A precipitation-hardened high-entropy alloy with outstanding tensile properties
Junyang He, Hui Wang, Hailong Huang et al. · Acta Materialia · 2015 · 2.7K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +11
Aref Yadollahi, Nima Shamsaei, Scott M. Thompson et al. · Materials Science and Engineering A · 2015 · 642 citations