Batteries & Supercaps · 2024 · 19 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryMaterials ChemistryCarbon-based Energy MaterialsCathode MaterialsElectrochemical CellsElectrochemical Energy StorageElectrode MaterialsEnergy Storage MaterialsCarbon CoatingsCarbon ElectrodesCoulombic EfficiencyCycle LifeElectrode CoatingsElectronic ConductivityEnergy DensitySpecific Capacity
Abstract The olivine‐type compound LiMn x Fe 1‐X PO 4 (LMFP) combines the advantageous characteristics of LiFePO 4 and LiMnPO 4 , including high energy density, extended cycle life, eco‐friendliness, and cost‐effectiveness. However, its application is limited by certain challenges such as low electronic conductivity and stability issues related to the Jahn‐Teller effect induced by Mn 3+ , which hinder its scalability. Here, we introduce an innovative approach by applying nitrogen‐doped carbon layers, derived from chitosan as both a carbon and nitrogen sources, to encapsulate LMFP. This encapsulation significantly improves LMFP′s electrochemical performance compared to those using sucrose‐derived carbon coatings. The LMFP cathode with nitrogen‐doped carbon coating exhibits a specific capacity of 156.8 mAh/g at 0.1 C, achieved a first‐cycle Coulombic efficiency of 96.8 %, and maintained a capacity retention rate of 94.6 % after 200 cycles at 1 C. This new method of employing chitosan for producing nitrogen‐doped carbon coatings holds great promise for enhancing the usability of LMFP in broader applications.
37
Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS
Kun Tang, Xiqian Yu, Jinpeng Sun et al. · Electrochimica Acta · 2011 · 568 citations