Petroleum Exploration and Development · 2024 · 10 citations · 12 references
EngineeringEarth SciencesReservoir EngineeringReservoir SimulationSubsurface Fluid FlowGas InjectionGas Migration ControlGas TransferMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsGas MigrationGas StorageGas Storage CapacityGas Storage MechanismsMicrofluidic ModelingMicrofluidics In Porous MediaPore Space UtilizationReservoir Simulation Of Gas Injection
Based on the microfluidic technology, a microscopic visualization model was used to simulate the gas injection process in the initial construction stage and the bottom water invasion/gas injection process in the cyclical injection-production stage of the underground gas storage (UGS) rebuilt from water-invaded gas reservoirs. Through analysis of the gas-liquid contact stabilization mechanism, flow and occurrence, the optimal control method for lifecycle efficient operation of UGS was explored. The results show that in the initial construction stage of UGS, the action of gravity should be fully utilized by regulating the gas injection rate, so as to ensure the macroscopically stable migration of the gas-liquid contact, and greatly improve the gas sweeping capacity, providing a large pore space for gas storage in the subsequent cyclical injection-production stage. In the cyclical injection-production stage of UGS, a constant gas storage and production rate leads to a low pore space utilization. Gradually increasing the gas storage and production rate, that is, transitioning from small volume to large volume, can continuously break the hydraulic equilibrium of the remaining fluid in the porous media, which then expands the pore space and flow channels. This is conducive to the expansion of UGS capacity and efficiency for purpose of peak shaving and supply guarantee.
12
Yves Méheust, Grunde Løvoll, Knut Jørgen Måløy et al. · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · 2002 · 187 citations