Heliyon · 2023 · 12 citations · 55 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallurgySurface EngineeringSurface ScienceCoatingsElectrode-electrolyte InterfacesElectrolyte MaterialsPowder Bed FusionSolid ElectrolytesCurrent DensityElectron Beam Powder Bed FusionPlasma OxidationPlasma-assisted OxidationPoresPorosityWrought AlloysX-ray Diffraction Analysis
This study investigates and compares plasma electrolytic oxidation (PEO) coatings produced on wrought Ti6Al4V alloy substrates with those resulting from electron beam powder bed fusion (PBF-EB). For a duration of 1000 s, a phosphate/silicate electrolyte with a current density of 50 A/cm 2 was employed to fabricate the coatings. Surface and polished cross-sections of the coated specimens underwent SEM and X-ray diffraction (XRD) analyses. The obtained coatings exhibit differences of up to approximately 18% in thickness and formation, as well as in their anatase phase. The anatase phase is present at a level of 54.09% in the substrates processed by PBF-EB and 38.54% in wrought substrates. After 1000 s of PEO, the coatings formed on the wrought substrates exhibited higher porosity and larger pores (>1 μm) compared to those produced on the PBF-EB specimens. The PBF-EB coatings had lower porosity because they contained fewer pores larger than 1 μm. The findings imply that the unique microstructural arrangement of PBF-EB-produced additively made Ti6Al4V materials plays a significant impact in the development and morphological properties of PEO oxide coatings.
55
NIH Image to ImageJ: 25 years of image analysis
Caroline A Schneider, Wayne Rasband, Kevin W. Eliceiri · Nature Methods · 2012 · 65.2K citations
H. Khalid Rafi, N.V. Karthik, Haijun Gong et al. · Journal of Materials Engineering and Performance · 2013 · 970 citations
Natural Sciences, Materials Engineering, Materials Science +14
L.E. Murr, E. V. Esquivel, Stella Quiñones et al. · Materials Characterization · 2008 · 557 citations
Natural Sciences, Materials Engineering, Materials Science +10