Journal of Materials Research and Technology · 2023 · 13 citations · 56 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer MaterialsStructural MaterialsComposite MaterialsFiber-reinforced CompositesImpact MechanicsImpact ResistanceMechanics Of Composite MaterialsPolymer-matrix CompositesComposite Failure MechanismsComposite Impact ResistanceDelamination Under ImpactImpact DamageImpact LoadsImpact Response Of CompositesImpact-resistant CompositesLow-velocity Impact
The wound products are subjected to various impact loads during their service life, which caused invisible damage to the composite layers. In this paper, we investigated the failure behavior of composite layers fabricated using an innovative multi-filament winding (MFW) process under impact load. Firstly, the principle of the MFW technique was introduced. Finite element models were constructed for both novel and conventional techniques, and subsequent low-velocity impact (LVI) tests were performed to acquire the time-force and time-energy data for the CFRP (Carbon Fiber Reinforced Polymer) laminates. The test results were in good agreement with the LVI responses of the composites obtained from the simulations. The failure modes and microscopic damage of the composite layers of the two techniques were analyzed by scanning electron microscopy (SEM). The results showed that under the same impact velocity, three damage modes of fiber fracture, matrix cracking, and delamination were observed for both techniques. However, the composite layers of the MFW technique exhibited more excellent impact resistance properties in terms of maximum contact force, absorbed energy, as well as inter-laminar and intra-laminar damage. The MFW technique exhibits a notable level of winding efficiency and demonstrates exceptional performance of manufactured products, which can meet the increasing demand of winding products over the years.
56
Hilario Hernández-Moreno, Bernard Douchin, Francis Collombet et al. · Composites Science and Technology · 2007 · 151 citations · Full text
Natural Sciences, Materials Science, Mechanical Engineering +11
Mohammad Rezasefat, Álvaro González-Jiménez, Marco Giglio et al. · Thin-Walled Structures · 2021 · 122 citations · Full text