IEEE Transactions on Antennas and Propagation · 2023 · 20 citations · 36 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringWireless CommunicationsAntenna ArraysAntenna DesignAntenna RadiationMicrowave AntennasPlanar AntennasReconfigurable AntennasAntenna Array DesignBeam ScanningCompact Antenna DesignMillimeter Wave ArraysMillimeter-wave Antenna DesignPattern ReconfigurabilityReconfigurable ArraysWireless Communication Systems
The spatial coverage of a fifth-generation (5G) smartphone antenna array is an important factor to consider in the design and implementation of 5G wireless communication systems. In this article, we present a compact, low-profile, and reconfigurable radiation pattern millimeter-wave (mm-wave) smartphone antenna array that can provide high spatial coverage through its hybrid structure and beam-scanning capabilities. The proposed antenna array introduces p-i-n diode-controlled strips that enable beam tilting of (±)50° in the vertical direction with respect to a smartphone. In addition, the antenna array can beam scan (±)45° while maintaining a gain of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$> 5$ </tex-math></inline-formula> dBi. The compact antenna array measures <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$28\times 5.5\times0.508$ </tex-math></inline-formula> mm, including the director and the reflector, which are situated next to the antenna. The array exhibited a wide −6-dB impedance bandwidth of 3480 MHz (26.42–29.90 GHz) and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$> 25$ </tex-math></inline-formula> dB of isolation in the simulation environment. The ON-/OFF-state of the diode results in three operating modes of the antenna array: 1) broadside −x; 2) broadside; and 3) broadside +x modes. The radiation performance of the antenna array was analyzed in each operating mode, with and without a smartphone present. Additionally, power density (PD) analysis was performed for safety analysis using a frequency-dependent homogeneous hand and head model while the antenna array was installed in a smartphone model. Finally, an antenna array was fabricated, and the measurement results were verified, showing good agreement with the simulated results.
36
Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
Theodore S. Rappaport, Shu Sun, Rimma Mayzus et al. · IEEE Access · 2013 · 7.4K citations · Full text