Polymer Degradation and Stability · 2023 · 27 citations · 56 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringSurface ScienceHeat DamageLaser Material ProcessingLaser Surface ProcessingSurface ModificationThermal Properties Of MaterialsThermal Protection MaterialsChar FormationCrystallinityLaser HeatingNanoindentationPolymer Thermal DegradationThermal DamageThermal Damage AssessmentThermal Degradation Studies
In the present work, the thermal degradation of laser-heated poly-ether-ether-ketone (PEEK) is studied as the heating duration increases. The damage morphology, chemical composition, crystallinity content, and mechanical properties are examined with optical microscopy, attenuated total reflection-Fourier transform infrared spectroscopy, differential scanning calorimetry, Raman spectroscopy, and continuous stiffness measurement nanoindentation. The applicability of those methods in detecting the thermal degradation of laser-heated PEEK and assessing the induced thermal damage is highlighted. Results show that short-time laser heating acts as an annealing process that improves the crystallinity and hardness on the affected surface of PEEK by up to 5.1% and 10.8% respectively. With a further increase in the heating duration, surface carbonisation occurs and a char layer is formed. Surface carbonisation is associated with the thermal limits of PEEK in laser heating decreasing by up to 50% its hardness and by 45% its indentation modulus. The char layer is found to act as a shielding mechanism that protects the bulk PEEK from the applied thermal load, resulting in mostly superficial thermally induced damage.
56
W. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 26.6K citations
Natural Sciences, Materials Engineering, Materials Science +16
A critical examination of the fundamental relations used in the analysis of nanoindentation data
Jack C. Hay, Alexei Bolshakov, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1999 · 441 citations
Natural Sciences, Materials Engineering, Materials Science +16
F. Naya, Carlos González, C.S. Lopes et al. · Composites Part A Applied Science and Manufacturing · 2016 · 248 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17