Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 2023 · 11 citations · 29 references
MedicineOrthopaedic SurgeryOrthopedic SurgeryBiomechanicsOrthopedicsPhysical ActivityArthroplasty BiomechanicsBiomechanical AnalysisHip ArthroplastyHip BiomechanicsImplant BiomechanicsProsthetic BiomechanicsActivitiesFinite Element ModelingProsthesis BiomechanicsProsthesis ModelingProsthetic LongevityWearWear MechanicsWear Rates
As the number of young and active individuals undergoing Total Hip Arthroplasty (THA) are increasing yearly, there is a need for hip prostheses to have increased longevity. Current investigations into the longevity of these prostheses only include walking as the patient's activity as there is limited data on the amount and intensity of other activity performed by the patient. To further understand the evolution of wear and increase the longevity of these implants, the impact of different activities on the hip prosthesis needs to be investigated. In this study, a finite element model and wear algorithm was developed to simulate both walking and bicycling over a 5-year period. The XLPE acetabular cup volumetric wear rate was found to be 33 mm3/yr while the femoral head taper wear rates were between 0.01 – 0.39 mm3/yr. The results showed that by adding bicycling of up to 80 km per week with normal walking activity, the XLPE mean volumetric wear rate increased by 67% and the metallic mean volumetric wear rate by 11%. However, the patient may gain further health benefits from this additional activity. Assistive electric bikes may also be used to further reduce the loads on the hip joint, allowing for lower amounts of wear.
29
Taper junction failure in large-diameter metal-on-metal bearings
David Langton, Raghavendra Sidaginamale, Jeff Lord et al. · Bone and Joint Research · 2012 · 281 citations · Full text
Janet Dickinson, Simon Kingham, Scott Copsey et al. · Transportation Research Part D Transport and Environment · 2003 · 197 citations