Divisional Load-Modulated Balanced Amplifier With Extended Dynamic Power Range

Abstract

With the prevalence of complex modulated signals, it is of utmost significance to research the extension of the dynamic power range of radio frequency (RF) power amplifiers (PAs). This article proposes a divisional load-modulated balanced amplifier (DLMBA) for extending the high-efficiency power range. The proposed DLMBA is composed of a local modulated Doherty PA (DPA) and a class-C biased balanced PA (BPA) pair. The output signal of the local DPA is fed into the isolation port of the output coupler of the BPA pair, forming a global load modulation. The design parameters of the DLMBA are derived after a comprehensive analysis. It is illustrated that the dynamic power range of the DLMBA can be extended beyond 12 dB by combining a local DPA and a BPA pair. Meanwhile, each subamplifier of the DLMBA is presented with a modulated impedance over the whole dynamic power range, avoiding voltage oversaturation. As a validation, a DLMBA operating over 1.85–2.05 GHz is fabricated and measured in this article. The fabricated DLMBA delivers a maximum output power of more than 44.8 dBm, a saturation drain efficiency (DE) of more than 53%, and a 13 dB back-off DE of more than 44% in the interested frequency band. Meanwhile, when the DLMBA is excited by a 20-MHz wideband signal with a peak-to-average ratio of 10.2 dB, the measured adjacent channel leakage ratio reaches −47.4 dBc after digital predistortion.