Experimental investigation on debonding behavior of Fe-SMA-to-steel joints

Abstract

This work is the first systematic study on the static behavior of adhesively-bonded Fe-SMA-to-steel joints in applications adopting iron-based Shape Memory Alloys (SMAs). In order to provide a better understanding on the mechanical behavior of the adhesively bonded joint, an experimental campaign was established, involving 24 lap-shear tests in a displacement-controlled loading regime. The test series includes two types of Fe-SMAs (non-prestrained and prestrained), three types of adhesives (SikaDur 30, Araldite 2015, and SikaPower 1277), and three different thickness values (0.5, 1, and 2 mm) for the adhesive. A digital image correlation (DIC) technique was employed to measure the full-field displacement and strain, which were then used to infer the shear behavior. The mechanical behavior was analyzed on the basis of the experimentally derived load–displacement curves, the shear stress profiles along the bond line, and the bond–slip curves; three stages were observed during the loading process of a bonded joint: (i) a linear stage, (ii) a damage accumulation stage, and (iii) a debonding propagation stage. The test results indicate that a more ductile adhesive or a thicker adhesive layer possess a higher fracture energy, leading to a greater bond capacity. The results were also compared against those from lap-shear tests on carbon fiber reinforced polymer (CFRP) bonded joints. It is found that an Fe-SMA bond and a CFRP bond behave similarly when a linear adhesive is utilized; a nonlinear adhesive, however, results in significant mechanical differences between the two bonded joints, which merit individual analysis.