ACS Applied Materials & Interfaces · 2022 · 49 citations · 59 references
EngineeringMaterials EngineeringMaterials ScienceActuatorsNanomaterialsSensorsMechanical SensorsPressure SensorsSensor MaterialsSoft SensorsStrain SensorsTactile SensingFibersMechanical DurabilityMechanical StabilityPiezoresistive MaterialsPiezoresistive SensorsSensitivityWearable Pressure SensorsWearable Sensors
Sustainable biomass materials are promising for low-cost wearable piezoresistive pressure sensors, but these devices are still produced with time-consuming manufacturing processes and normally display low sensitivity and poor mechanical stability at low-pressure regimes. Here, an aqueous MXene ink obtained by simply ball-milling is developed as a conductive modifier to fabricate the multiresponsive bidirectional bending actuator and compressible MXene-plant fiber sponge (MX-PFS) for durable and wearable pressure sensors. The MX-PFS is fabricated by physically foaming MXene ink and plant fibers. It possesses a lamellar porous structure composed of one-dimensional (1D) MXene-coated plant fibers and two-dimensional (2D) MXene nanosheets, which significantly improves the compression capacity and elasticity. Consequently, the encapsulated piezoresistive sensor (PRS) exhibits large compressible strain (60%), excellent mechanical durability (10 000 cycles), low detection limit (20 Pa), high sensitivity (435.06 kPa–1), and rapid response time (40 ms) for practical wearable applications.
59
3D Synergistical MXene/Reduced Graphene Oxide Aerogel for a Piezoresistive Sensor
Yanan Ma, Hang Zhang, Feng Cheng et al. · ACS Nano · 2018 · 858 citations
Natural Sciences, Materials Engineering, Materials Science +17