Energies · 2022 · 16 citations · 50 references
EngineeringChemical EngineeringMechanical EngineeringAir Pollution ControlCombustionInternal Combustion EnginesCombustion ProcessesEngine DesignEngine EmissionsEngine PerformanceEngine Performance CharacteristicsEngine ThermodynamicsCombustion CharacteristicsDiesel CombustionDiesel Engine CombustionDiesel EnginesExhaust EmissionsIgnition DelayPollutant EmissionsSynthetic Fuels
Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot–NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump–line–nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption.
50
Soot formation in combustion processes
Irvin Glassman · Symposium (International) on Combustion · 1989 · 505 citations
Combustion and emissions of a DI diesel engine fuelled with diesel-oxygenate blends
Yi Ren, Zuohua Huang, Haiyan Miao et al. · Fuel · 2008 · 332 citations
Engineering, Automotive Engineering, Mechanical Engineering +14