Wearable Pressure Sensor Array with Layer-by-Layer Assembled MXene Nanosheets/Ag Nanoflowers for Motion Monitoring and Human–Machine Interfaces

Abstract

Recently, wearable sensors and electronic skin systems have become prevalent, which can be employed to detect the movement status and physiological signals of wearers. Here, a pressure sensor composed of mesh-like micro-convex structure polydimethylsiloxane (PDMS), MXene nanosheet/Ag nanoflower (AgNF) films, and flexible interdigital electrodes was designed by layer-by-layer (LBL) assembly. The unique microstructure of PDMS effectively increases the contact area and improves sensitivity. Moreover, AgNFs were introduced into the MXene as a “bridge,” and the synergistic effect of the two further enhanced the performance of the sensor. The pressure sensor has high sensitivity (191.3 kPa–1), good stability (18,000 cycles), fast response/recovery time (80 ms/90 ms), and low detection limit (8 Pa), so it can be used for all-round monitoring of the human body. Sensing arrays were integrated with a wireless transmitter as an intelligent artificial electronic skin for spatial pressure mapping and human–computer interaction sensing. Moreover, we develop a smart glove by a simple method, combining it with a 3D model for wireless accurate detection of hand poses. This provides ideas for hand somatosensory detection technology, leading to health monitoring, intelligent rehabilitation training, and personalized medicine.