Ceramics · 2022 · 10 citations · 31 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingCeramicsMaterials Processing3D PrintingCeramic Additive ManufacturingFabrication MaterialsMicrostructure ControlAdditive FabricationAdditive Manufacturing MicrostructureDigital Light ProcessingPrintabilityRheological PropertiesShape ControlSlurry Preparation
Mica is a group of clay minerals that are frequently used to fabricate electrical and thermal insulators and as adsorbents for the treatment of cationic pollutants. However, conventional subtractive manufacturing has the drawback of poor three-dimensional (3D) shape control, which limits its application. In this study, we propose digital light processing (DLP)-based additive manufacturing (AM) as one of the most effective ways to address this drawback. Two major challenges for the ceramic DLP process are the production of a homogeneous and stable slurry with the required rheological properties and the maintenance of printing precision. The mica green body was fabricated using a 53 vol.% solid loading slurry through DLP, which exhibited good dimensional resolution under an exposure energy dose of 10 mJ/cm2. The precise, complex 3D structure was maintained without any defects after debinding and sintering at 1000 °C. The use of ceramic AM to overcome the shape-control limitations of mica demonstrated in this study offers great potential for expanding the applications of mica.
31
Stereolithography of structural complex ceramic parts
Thierry Chartier, Christophe Chaput, Franck Doreau et al. · Journal of Materials Science · 2002 · 260 citations
Dispersion and stability of SiC ceramic slurry for stereolithography
Guojiao Ding, Rujie He, Keqiang Zhang et al. · Ceramics International · 2019 · 218 citations