Transactions of Nonferrous Metals Society of China · 2022 · 10 citations · 35 references
EngineeringMaterials EngineeringMaterials ScienceMetallurgySolidificationThermal AnalysisAlloy SolidificationAlloysCastingCasting SolidificationSolidification ModelingSolidification ProcessingAmorphous StructureCast AlloysCasting SimulationGravity CastingMold FillingSolidification ParametersSolidification PathwaysX-ray Diffraction Analysis
An outer ring of 29320 self-aliging roller bearing was used in an experimental study on the casting of Zr41Ti14Cu12.5Ni10Be22.5 amorphous alloy. Numerical simulations of mold filling and solidification processes were carried out to determine the velocity fields and temperature fields of the alloy melt during mold filling process as well as the temperature fields and temperature gradient fields in the course of the solidification. According to the results, a cast with a complete shape can be obtained at 1200 °C under the condition that the cooling rate is greater than the critical cooling rate. The ring-shaped part with a thickness of 25 mm, an equivalent diameter of 22 mm, and a mass of 1.32 kg was prepared by gravity casting in a copper mold. X-ray diffraction and differential scanning calorimetry data revealed that the produced cast had the amorphous structure.
35
Super Plastic Bulk Metallic Glasses at Room Temperature
Yan Hui Liu, Gang Wang, Ru Ju Wang et al. · Science · 2007 · 1.1K citations
Natural Sciences, Materials Engineering, Materials Science +17
The case for bulk metallic glass
Mark Telford · Materials Today · 2004 · 781 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Fracture of Brittle Metallic Glasses: Brittleness or Plasticity
Xuekui Xi, Dongdong Zhao, M. X. Pan et al. · Physical Review Letters · 2005 · 542 citations
Natural Sciences, Materials Engineering, Materials Science +17