Codoped porous carbon nanofibres as a potassium metal host for nonaqueous K-ion batteries

Abstract

Abstract Potassium metal is an appealing alternative to lithium as an alkali metal anode for future electrochemical energy storage systems. However, the use of potassium metal is hindered by the growth of unfavourable deposition (e.g., dendrites) and volume changes upon cycling. To circumvent these issues, we propose the synthesis and application of nitrogen and zinc codoped porous carbon nanofibres that act as potassium metal hosts. This carbonaceous porous material enables rapid potassium infusion (e.g., < 1 s cm −2 ) with a high potassium content (e.g., 97 wt. %) and low potassium nucleation overpotential (e.g., 15 mV at 0.5 mA cm −2 ). Experimental and theoretical measurements and analyses demonstrate that the carbon nanofibres induce uniform potassium deposition within its porous network and facilitate a dendrite-free morphology during asymmetric and symmetric cell cycling. Interestingly, when the potassium-infused carbon material is tested as an active negative electrode material in combination with a sulfur-based positive electrode and a nonaqueous electrolyte solution in the coin cell configuration, an average discharge voltage of approximately 1.6 V and a discharge capacity of approximately 470 mA h g −1 after 600 cycles at 500 mA g −1 and 25 °C are achieved.