Micromachines · 2022 · 17 citations · 37 references
EngineeringElectrical EngineeringMaterials ScienceOpticsOptoelectronicsPhotonicsIntegrated OpticsIntegrated PhotonicsOptical ResonatorsPhotonic Integrated CircuitsSilicon PhotonicsWaveguidesFour-wave MixingIntegrated Photonic DevicesIntegrated WaveguidesMicroring ResonatorsMultimode WaveguidesRib WaveguidesRing ResonatorsWaveguide Loss
A reflowing photoresist and oxidation smoothing process is used to fabricate ultra-high-Q silicon microring resonators based on multimode rib waveguides. Over a wide range of wavelengths near 1550 nm, the average Q-factor of a ring with 1.2-μm-wide waveguides reaches up to 1.17 × 106, with a waveguide loss of approximately 0.28 dB/cm. For a resonator with 1.5-μm-wide waveguides, the average Q-factor reaches 1.20 × 106, and the waveguide loss is 0.27 dB/cm. Moreover, we theoretically and experimentally show that a reduction in the waveguide loss significantly improves the conversion efficiency of four-wave mixing. A high four-wave mixing conversion efficiency of −17.0 dB is achieved at a pump power of 6.50 dBm.
37
Wim Bogaerts, Peter De Heyn, Thomas Van Vaerenbergh et al. · Laser & Photonics Review · 2011 · 2.5K citations
Engineering, Biomedical Engineering, Electrical Engineering +17
All-optical control of light on a silicon chip
Vilson R. Almeida, Carlos Angulo Barrios, Roberto R. Panepucci et al. · Nature · 2004 · 1.5K citations
Fabrication of ultralow-loss Si/SiO_2 waveguides by roughness reduction
Kevin C. Lee, Desmond R. Lim, Lionel C. Kimerling et al. · Optics Letters · 2001 · 559 citations