1c:I[419806,["/_next/static/chunks/bb923814e1f4d2e9.js","/_next/static/chunks/dd3ee9f5b7716ca6.js","/_next/static/chunks/4204a0ae82542ca8.js","/_next/static/chunks/1270dead247da766.js","/_next/static/chunks/6e1aa89a642f40be.js","/_next/static/chunks/2d7aa753e81324a8.js","/_next/static/chunks/8ffd0b71567920d8.js","/_next/static/chunks/67ea6dfd21f16c5f.js","/_next/static/chunks/24eb4379f68013fd.js","/_next/static/chunks/b8cd775ffdf935bd.js","/_next/static/chunks/983103cd9eb7b428.js","/_next/static/chunks/263f2cdcb9aa2341.js","/_next/static/chunks/294b9525248c8e5f.js"],"default"] 1d:T521,It remains challenging to fabricate strain-sensing materials and exquisite geometric constructions for integrating extraordinary sensitivity, low strain detectability, high stretchability, tunable sensing range, and thin device dimensions into a single type of strain sensor. A percolation network based on Ti₃C₂T_x MXene/carbon nanotube (CNT) composites was rationally designed and fabricated into versatile strain sensors. This weaving architecture with excellent electric properties combined the sensitive two-dimensional (2D) Ti₃C₂T_x MXene nanostacks with conductive and stretchable one-dimensional (1D) CNT crossing. The resulting strain sensor can be used to detect both tiny and large deformations with an ultralow detection limit of 0.1% strain, high stretchability (up to 130%), high sensitivity (gauge factor up to 772.6), tunable sensing range (30% to 130% strain), thin device dimensions (<2 μm), and excellent reliability and stability (>5000 cycles). The versatile and scalable Ti₃C₂T_x MXene/CNT strain sensors provide a promising route to future wearable artificial intelligence with comprehensive tracking ability of real-time and in situ physiological signals for health and sporting applications.1e:T50f,Stretchable electronics have recently been extensively investigated for the development of highly advanced human‐interactive devices. Here, a highly stretchable and sensitive strain sensor is fabricated based on the composite of fragmentized graphene foam (FGF) and polydimethylsiloxane (PDMS). A graphene foam (GF) is disintegrated into 200–300 μm sized fragments while maintaining its 3D structure by using a vortex mixer, forming a percolation network of the FGFs. The strain sensor shows high sensitivity with a gauge factor of 15 to 29, which is much higher compared to the GF/PDMS strain sensor with a gauge factor of 2.2. It is attributed to the great change in the contact resistance between FGFs over the large contact area, when stretched. In addition to the high sensitivity, the FGF/PDMS strain sensor exhibits high stretchability over 70% and high durability over 10 000 stretching‐releasing cycles. When the sensor is attached to the human body, it functions as a health‐monitoring device by detecting various human motions such as the bending of elbows and fingers in addition to the pulse of radial artery. Finally, by using the FGF, PDMS, and μ‐LEDs, a stretchable touch sensor array is fabricated, thus demonstrating its potential application as an artificial skin.1f:T416,Wearable textile electronics are highly desirable for realizing personalized health management. However, most reported textile electronics can either periodically target a single physiological signal or miss the explicit details of the signals, leading to a partial health assessment. Furthermore, textiles with excellent property and comfort still remain a challenge. Here, we report a triboelectric all-textile sensor array with high pressure sensitivity and comfort. It exhibits the pressure sensitivity (7.84 mV Pa^-1), fast response time (20 ms), stability (>100,000 cycles), wide working frequency bandwidth (up to 20 Hz), and machine washability (>40 washes). The fabricated TATSAs were stitched into different parts of clothes to monitor the arterial pulse waves and respiratory signals simultaneously. We further developed a health monitoring system for long-te

	Year	Citations

References