Rapid Prototyping Journal · 2022 · 14 citations · 31 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingMechanical DesignSurface EngineeringAlloysHybrid FabricationPowder Bed FusionScaffold DesignScaffold FabricationTissue Engineering ScaffoldsAdditive Manufacturing Of ScaffoldsAdditively Manufactured ScaffoldsComputer-aided Design ModelsEnergy DensityLaser Powder Bed FusionMetallic ScaffoldsScaffold ArchitectureScaffold Geometry
Purpose Additive manufacturing of metallic scaffolds using laser powder bed fusion is challenging because of the accumulation of extra material below overhanging and horizontal surfaces. It reduces porosity and pore size and increases the effective strut size. These challenges are normally overcome by using volumetric energy density (VED) values lower than the optimum values, which, however, results in poor physio-mechanical properties. The purpose of this study is to assist scaffold manufacturers with a novel approach to fabricate stronger yet accurate scaffolds. Design/methodology/approach This paper presents a strategy for laser exposure that enables fabricating titanium-6–aluminum-4–vanedium (Ti6Al4V) alloy scaffolds with the required properties without compromising the geometric features. The process starts from computer-aided design models sliced into layers; dividing them into core (upper) and downskin (lower) layers; and fabrication using hybrid VED (low values for downskin layers and high values for core layers). Findings While exposing the core layers, laser remelted the downskin layers, resulting in better physio-mechanical properties (surface roughness, microhardness and density) for the whole strut without affecting its dimensional accuracy. A regression equation was developed to select the downskin thickness for a given combination of strut thickness and core VED to achieve the desired range of properties. The proposed approach was validated using microstructure analysis and compression testing. Practical implications This paper is expected to be valuable for the manufacturers of Ti6Al4V scaffolds, in achieving the desired properties. Originality/value This is probably the first time the hybrid VED approach has been applied for obtaining scaffolds with the desirable physio-mechanical and geometrical properties.
31
Sajad Arabnejad, R. Burnett Johnston, Jenny Ann Pura et al. · Acta Biomaterialia · 2015 · 576 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Lewis Mullen, R. Stamp, W. Brooks et al. · Journal of Biomedical Materials Research Part B Applied Biomaterials · 2008 · 410 citations
Chunlei Qiu, Sheng Yue, Nicholas J.E. Adkins et al. · Materials Science and Engineering A · 2015 · 378 citations · Full text