Journal of Food Processing and Preservation · 2022 · 25 citations · 44 references
EngineeringMechanical EngineeringHeat TransferLyophilizationThermal AnalysisExergy AnalysisFood DryingThermal ProcessingDryingDrying ProcessesDrying Time ReductionExergyExergy Analysis Of Thermal SystemsExergy EfficiencyMathematical Modeling Of DryingProcess Parameters
In this investigation, energy and exergy analysis of a hybrid infrared-convective (IR-CV) dryer is presented for drying cantaloupe slices. The experiments were performed at three temperature levels (40, 55, and 70 °C), one level of air velocity (0.5 m/s), and three IR powers (250, 500, 750 W). The relationships between the input process parameters (IR power, input air temperature, and drying time) and the thermodynamic properties of the dried product (moisture ratio, drying rate, energy efficiency, exergy efficiency, and exergy loss) were modeled by implementing the artificial neural network (ANN) and ANFIS. Results indicated that high IR power and air temperature can shorten the drying time, meanwhile increasing the energy efficiency. Based on the obtained results, input air temperature and IR power highly affect the exergy efficiency. The highest exergy efficiency was obtained at the input air temperature of 70 °C and IR power of 750 W. The exergy loss was increased by increasing both parameters of the air temperature and IR power. Models developed using ANN and ANFIS indicated that the ANFIS model predicted the moisture ratio, energy efficiency and exergy loss better than the ANN model, as it estimated these thermodynamic parameters at a higher regression coefficient (>0.9889) than ANN (0.9850). While, the accuracy of the ANN model was better for predicting drying rate and exergy efficiency.
44
Fundamentals of Heat and Mass Transfer
Ahmed Y. Abdel Azim · 2011 · 5.5K citations
Lizhen Deng, Xuhai Yang, Arun S. Mujumdar et al. · Drying Technology · 2017 · 269 citations
Comparison of energy parameters in various dryers
Ali Motevali, Saeid Minaei, Ahmad Banakar et al. · Energy Conversion and Management · 2014 · 240 citations