Scientific Reports · 2022 · 32 citations · 34 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallurgyTribologyComposite MaterialsGraphene NanomaterialsMetal Matrix CompositesPowder MetallurgyStrength Of MaterialsStrengthening MechanismsAluminum Matrix CompositesBall MillingFriction CoefficientGrapheneGraphene CompositesGraphene MaterialsGraphene ReinforcementSingle-layer Graphene
Abstract In this paper, graphene reinforced aluminum matrix composites are successfully prepared by high-energy ball milling. The results show that no graphene agglomeration is found in the mixed powder. The complex composites prepared by high energy ball milling and powder metallurgy have approximately 4–5 layers of graphene and the thickness of single-layer graphene is approximately 0.334 nm. The final experimental results confirm the formation of compound AlC 3 in the microstructure, and its diffraction spot index is ( $$\overline{2 }$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mover> <mml:mn>2</mml:mn> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> 00), ( $$\overline{1 }$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mover> <mml:mn>1</mml:mn> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> 1 $$\overline{1 }$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mover> <mml:mn>1</mml:mn> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> ) and (11 $$\overline{1 }$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mover> <mml:mn>1</mml:mn> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> ). The maximum friction coefficient is 0.126, and the average friction coefficient is 0.027, suggesting good wear resistance and corrosion resistance. Additionally, the friction corrosion mechanism of the material is deeply analyzed. The results of strengthening mechanism analysis show that the main strengthening mechanism of the materials designed in this experiment is thermal mismatch strengthening. It can be concluded that the yield strength of the material calculated by the modified model is 227.75 MPa. This value is slightly lower than the calculated value of the general shear lag model (237.68 MPa). However, it is closer to the yield strength value of the actual material (211 MPa).
34
Electric Field Effect in Atomically Thin Carbon Films
Kostya S. Novoselov, A. K. Geǐm, Da Jiang et al. · Science · 2004 · 66.1K citations · Full text
Hall–Petch relation and boundary strengthening
Niels Hansen · Scripta Materialia · 2004 · 3.6K citations