Real-Time Downhole Torsional Vibration Monitor for Improving Tool Performance and Bit Design

David Chen, Blaine Comeaux, Graeme R. Gillespie, George Irvine, B. Więcek

Proceedings of IADC/SPE Drilling Conference · 2006 · 14 citations · 0 references

Concepts

Abstract

Real-Time Downhole Torsional Vibration Monitor for Improving Tool Performance and Bit Design David C-K. Chen; David C-K. Chen Halliburton Co. Search for other works by this author on: This Site Google Scholar Blaine C. Comeaux; Blaine C. Comeaux Halliburton Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar Graeme Murdoch Gillespie; Graeme Murdoch Gillespie Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar George T. Irvine; George T. Irvine Search for other works by this author on: This Site Google Scholar Boguslaw Wiecek Boguslaw Wiecek Sperry Drilling Services Search for other works by this author on: This Site Google Scholar Paper presented at the IADC/SPE Drilling Conference, Miami, Florida, USA, February 2006. Paper Number: SPE-99193-MS https://doi.org/10.2118/99193-MS Published: February 21 2006 Cite View This Citation Add to Citation Manager Share Icon Share Twitter LinkedIn Get Permissions Search Site Citation Chen, David C-K., Comeaux, Blaine C., Gillespie, Graeme Murdoch, Irvine, George T., and Boguslaw Wiecek. "Real-Time Downhole Torsional Vibration Monitor for Improving Tool Performance and Bit Design." Paper presented at the IADC/SPE Drilling Conference, Miami, Florida, USA, February 2006. doi: https://doi.org/10.2118/99193-MS Download citation file: Ris (Zotero) Reference Manager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex Search nav search search input Search input auto suggest search filter All ContentAll ProceedingsSociety of Petroleum Engineers (SPE)SPE/IADC Drilling Conference and Exhibition Search Advanced Search AbstractA new downhole torsional vibration sensor built into a rotary steerable system has provided a new monitoring system for improving drilling efficiency and avoiding downhole failures related to torsional vibration. The strength of the new sensor is that it measures rotational changes right at the bit as compared to the usual 50–100 feet behind the bit with conventional MWD/LWD sensors. In addition, the sensor is always at the same location regardless of BHA configuration, which provides a higher level of consistency in torsional vibration measurement. The ability to evaluate bit performance objectively has consequently resulted in better bit design and rotary steerable tool performance.The new torsional efficiency monitor has been used in areas where torsional vibration was recognized as a problem. This paper will discuss the application of the real-time downhole monitor and the results from detailed analysis of the data from the initial field runs in these harsh environments. The ability to immediately detect the occurrence of torsional vibration and to take corrective action before failures occur has significantly improved the ability of the rotary steerable system to survive harsh conditions.IntroductionRotary steerable systems (RSS) are routinely used in the most expensive drilling operations, and operators who employ these systems have high expectations of significant cost savings. However, due to the greater number of moving parts in rotary steerable systems, the level of reliability has been below that of measurement-while-drilling (MWD) and logging-while-drilling (LWD) systems, particularly when operating in high vibration environments. In some cases, the high cost of trips and tool repairs due to tool failures has compromised the potential economic impact of the RSS technology.The area of downhole vibrations and in particular, torsional vibration (or stick-slip) has been studied extensively in the past. A few papers have addressed special aspects of this complex subject[1,2,3]. Downhole monitoring systems have shed light on the dynamic motions of the drill string. Bit rotation speeds as high as 300–400% over the surface RPM has been recorded. However, a complete picture of the BHA (Bottom Hole Assembly) behavior would require downhole vibration sensors that:Can detect and accurately measure the full range of dynamic motion, including axial, lateral, and torsional vibration.Can alert operators of dangerous levels in a timely fashion (i.e., in real-time) so changes can be made to mitigate vibration before severe damage occurs on the drillstring / bottom hole assembly.Can record higher density data for detailed post-run vibration analysis to pin-point the source of vibration, so that modifications to the bit or BHA can be made for future runs.Can monitor at different points in the drill stringCurrently, vibration sensors are often under-utilized, mainly due to limited drilling budgets or a reluctance to pay for these additional services. This obviously results in critical gaps in data required to investigate the cause of a tool failure when it occurs. Lack of vibration data also makes fair performance comparisons to offset wells very difficult.Low-frequency torsional vibration, usually below 5 Hz (stick-slip) is measurable on the surface from the oscillation in the rotary torque[4]. However, high-frequency torsional vibration (>50Hz) will not transmit to the surface[5]. The use of soft-torque rotary tables, while sometimes reducing the severity of stick-slip, has tended to mask the downhole situation to some extent. Keywords: drillstring design, drillstring dynamics, Efficiency, directional drilling systems and equipment, Upstream Oil & Gas, mean rpm, torsional efficiency data, new sensor, real time system, drilling operation Subjects: Drillstring Design, Drilling Operations, Drilling Equipment, Drillstring dynamics, Directional drilling systems and equipment This content is only available via PDF. 2006. IADC/SPE Drilling Conference You can access this article if you purchase or spend a download.