Formation of a bicontinuous structure membrane of polyvinylidene fluoride in diphenyl carbonate diluent via thermally induced phase separation

Abstract

Abstract Diphenyl carbonate was used as a diluent to prepare microporous polyvinylidene fluoride (PVDF) membrane via thermally induced phase‐separation method. The liquid–liquid phase‐separation phenomenon was found in PVDF/diphenyl carbonate system during the thermally induced phase‐separation process. The monotectic point of this system appeared at a high polymer concentration approximately 56 wt %. This suggested that PVDF membrane with a bicontinuous or cellular structure could be obtained when the PVDF concentration was less than this point value. The effects of polymer concentration and quenching temperature on the membrane structure, porosity, and tensile strength were also investigated. The results showed that low polymer concentration and high quenching temperature led to a large pore size membrane. The tensile strength of the membrane increased with increase in the polymer concentration, but the porosity of the membrane decreased. On condition that the PVDF concentration was higher than 60 wt %, only polymer crystallization occurred and a typical compact spherulitic structure was obtained. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009