Scientific Reports · 2022 · 13 citations · 44 references
EngineeringManufacturing EngineeringAdditive ManufacturingManufacturing ProcessesMicrofabrication3D PrintingMicrofabrication ProcessesMicrofluidic Device FabricationMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsManufacturingMicrochannel FabricationMicromixersMicromixingMixing EfficiencyReynolds NumberSegregationSegregation Effects
This study investigates the manufacturing method of oblique patterns in microchannels and the effect of these patterns on mixing performance in microchannels. To fabricate three-dimensional (3D) and oblique patterns in microchannels, 3D printing and replica methods were utilized to mold patterns and microchannels, respectively. The angle and size of the patterns were controlled by the printing angle and resolution, respectively. The mixing efficiency was experimentally characterized, and the mixing principle was analyzed using computational fluid dynamics simulation. The analysis showed that the mixing channel cast from the mold printed with a printing angle of 30° and resolution of 300 μm exhibited the best mixing efficiency with a segregation index of approximately 0.05 at a Reynolds number of 5.4. This was because, as the patterns inside the microchannel were more oblique, "split" and "recombine" behaviors between two fluids were enhanced owing to the geometrical effect. This study supports the use of the 3D printing method to create unique patterns inside microchannels and improve the mixing performance of two laminar flows for various applications such as point-of-care diagnostics, lab-on-a-chip, and chemical synthesis.
44
Chaotic Mixer for Microchannels
Abraham D. Stroock, Stephan K. W. Dertinger, Armand Ajdari et al. · Science · 2002 · 3.4K citations
Biotechnology at low Reynolds numbers
James P. Brody, Paul Yager, Raymond E. Goldstein et al. · Biophysical Journal · 1996 · 522 citations
Elisabeth Verpoorte, Ν. F. de Rooij · Proceedings of the IEEE · 2003 · 502 citations