2022 IEEE International Solid- State Circuits Conference (ISSCC) · 2022 · 14 citations · 3 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSensorsAnalog Integrated CircuitsCmos Circuit DesignDigital Integrated CircuitsMixed-signal Integrated Circuit DesignMixed-signal IntegrationNoise In Electronic DevicesCmos Analog Circuit DesignCmos Analog Integrated CircuitsDigital Signal Processing BlocksGain EnhancementLow-dropout RegulatorsLow-power Cmos DesignNoise AnalysisPower Supply Rejection
Complex SoCs in nanoscale CMOS integrate a variety of digital compute/memory and analog/mixed-signal circuits such as SerDes transceivers, RF/wireless front-end, PLLs, sensors, etc. On-chip low-dropout regulators (LDOs) isolate the input <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{V}_{\text{in}}$</tex> noise from switching DC-DC converters powering the digital blocks (Fig. 30.4.1) and provide high power-supply rejection (PSR) to the noise-sensitive analog/mixed-signal circuits by modulating the small-signal output resistance <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(\mathrm{R}_{0}$</tex> ) of the power FET in the saturation region. Therefore, the minimum dropout (DO) voltage must be larger than the necessary gate overdrive (OV). While larger DO enables higher Ro and better PSR, it degrades the LDO power conversion efficiency (PCE). Using larger power FETs can reduce OV and DO for a target <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\mathrm{l}_{\max}$</tex> but at the cost of more die area. Therefore, LDO designs that provide the required high PSR while maximizing PCE and area efficiency are essential for high-performance SoCs [1].
3