Journal of Materials Research and Technology · 2022 · 11 citations · 46 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallurgyAlloysMicrostructure AnalysisNanomechanical PropertiesNanomechanicsPlastic DeformationPlasticityDeformationIndentation TestingNanoindentationNanoscale PlasticityOrientationsPlastic AnisotropyPlastic Deformation At The NanoscaleTitanium Alloys
A near fully lamellar Ti-43Al-5Nb-3.5Cr-1Zr alloy with different lamellar orientations was investigated by electron backscattered diffraction and nanoindentation measurements to study the influence of lamellar orientation on the nanohardness of α2/γ lamellae in a β-solidifying TiAl alloy. The results indicate that nanohardness of the α2/γ lamellae exhibits apparent plastic anisotropy, which is simultaneously determined by the oriented angle θ1 between the indentation direction and the lamellar plane and the deformation characteristics of the α2 and γ phase. Furthermore, the nanohardness of the individual lamellar colony decreases with an increase in the oriented angle from hard (0°) to soft (45°) orientations. Based on the analysis of the Schmid factor, the nanohardness value of the hard oriented α2/γ lamellae with a small Schmid factor is greater than the soft orientation with a large Schmid factor. The pile-up morphology on the γ phase is determined to be higher than that on the B2 phase at the interface through atomic force microscopy characterizations, which is attributed to the stronger plastic deformability of the γ phase. Therefore, the results can be successfully applied to understand the microscopic deformation mechanism of near fully lamellar β-solidifying TiAl alloy from a new perspective.
46
W. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 26.6K citations
Natural Sciences, Materials Engineering, Materials Science +16
Robert W. Cahn · Intermetallics · 1994 · 935 citations
Polysynthetic twinned TiAl single crystals for high-temperature applications
Guang Chen, Yingbo Peng, Gong Zheng et al. · Nature Materials · 2016 · 776 citations
Natural Sciences, Materials Engineering, Materials Science +13
A new ordered orthorhombic phase in a Ti3AlNb alloy
D. Banerjee, A.K. Gogia, Titas Nandi et al. · Acta Metallurgica · 1988 · 619 citations
Natural Sciences, Materials Engineering, Materials Science +14