Physics of Fluids · 2021 · 36 citations · 43 references
EngineeringAerospace EngineeringMechanical EngineeringHeat TransferThermal AnalysisThermodynamicsLubrication EngineeringLubrication SystemsBearingsCompressibilityCompressibility EffectsLubricationLubrication MechanismsThermal Effects In BearingsThermal ExpansionThermal Expansion Coefficient
A global heat balance method for supercritical carbon dioxide (S-CO2) high speed tilting pad bearings was developed, in which the real gas effect, variable thermodynamic properties, and turbulence effect were considered. The bearing characteristics can be obtained by the partial derivative method embracing dynamic variations of complete variables. Then thermohydrodynamic lubrication mechanisms for S-CO2 bearings are studied, and results indicate that the real gas effect of thermal compressibility is significant. The influence of the thermal effect on the static and dynamic characteristics of bearings is caused by changes in density, specific heat, and thermal expansion coefficient rather than viscosity, which is totally different from oil bearings. In general, the influence of thermohydrodynamic lubrication on static characteristics of S-CO2 tilting pad bearings is more obvious than that on dynamic coefficients. For example, the maximum deviation of damping coefficients of a bearing with parameters in this research at a certain speed range is 8%, and that of the load capacity at the corresponding speed is 10.7%. However, the influence of the thermal effect on dynamic coefficients is varied at different rotating speeds.
43
A Linearized Turbulent Lubrication Theory
Chung-Wah Ng, C. H. T. Pan · Journal of Basic Engineering · 1965 · 337 citations
Analytical model of bolted disk–drum joints and its application to dynamic analysis of jointed rotor
ZY Qin, Q-K Han, F.L. Chu · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 2013 · 166 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17