The Aeronautical Journal · 2016 · 19 citations · 2 references
EngineeringAerospace EngineeringFlight MechanicsMetrologyOpticsAerodynamic TestingAircraft InstrumentationForm MeasurementInterferometryMechanical MeasurementOptical MetrologyDeformationFlight OperationsFlight Test EngineeringFlight TestingInstrumentation For Aeroelastic TestingMeasurement Campaign DesignMeasurement TechniquesOptical Form Metrology
Flight testing is essential for aeronautic research and engaging, and the AIM² project seeks to advance optical metrology for flight tests, noting that gliders are uncommon platforms and offering lessons learned. The paper presents a transnational measurement campaign using a glider as a versatile test bed under an EU‑funded collaborative project. The study employs IPCT and infrared thermography on a glider, and shares practical guidance on equipment, data collection, processing, and regulatory compliance for dense airspace operations. Results from IPCT‑based optical deformation measurements, including experimental setup and flight testing outcomes, are summarized.
ABSTRACT Flight testing is both vital for collecting data for aeronautic research and at the same time fascinating for its contributors. Taking a glider as a versatile test bed example, this paper presents a transnational measurement campaign within the framework of a collaborative project funded by the European Commission. This project Advanced In-Flight Measurement Techniques 2 (AIM²) is a follow-up of Advanced In-Flight Measurement Techniques (AIM) and dedicated to developing and enhancing promising optical metrology for various flight test applications up to an industrial level. The Image Pattern Correlation Technique (IPCT) and infrared thermography (IRT) are two of these modern non-intrusive measurement methods that were further developed and applied to the glider test bed within the scope of AIM². Focusing on optical deformation measurements with IPCT the experimental setup, the flight testing and results are summarily discussed. Gliders are not commonly used flight test platforms, which is why this contribution concludes with some lessons learned in general and especially related to the presented application. The experience to be shared with the flight testing community addresses equipment preparation, data collection and processing as well as how to meet official requirements and perform test flight operations in a dense controlled airspace.
2
Pressure measurements on aircraft wing using phase-shifted fibre Bragg grating sensors
Edmon Chehura, Stephen W. James, Nicholas J. Lawson et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2009 · 17 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17