2005 · 24 citations · 17 references
EngineeringMaterials EngineeringMaterials ScienceAnalytical ChemistryRadiation MeasurementSurface ScienceBackground ReductionIonization ProcessesDirect Current SputteringIon Beam IrradiationOblique AnglesQuartz Crystal MicrobalanceRefractory MetalsSputteringSputtering ProcessesSputtering Techniques
Differential sputter yields are reported for Molybdenum, Tantalum, and Tungsten after exposure to Xenon, Krypton, and Argon ion bombardment at multiple angles of incidence (0 60°) and ion energies (150 1500 eV). Differential yields were measured by sweeping a Quartz Crystal Microbalance (QCM) in a semi-circular arc over a given target in the plane defined by the target normal and ion beam axis. Differential yields were integrated to obtain total sputter yields. The measured total yields were generally less than, but comparable to, published values. The dependence of total yield on angle of incidence was also investigated. The total yields were found to be largest for angles of incidence between 45° and 60°. The effects of the bombarding ion energy and the ion mass-to-target atom mass ratio on the differential yield distributions are discussed. In addition, preliminary measurements of differential sputter yields as a function of both polar and azimuthal angles are presented. Nomenclature As = QCM sensor area (cm) J = current (mA) j = current density (mA/cm) J+ = singly ionized particle current (mA) J++ = doubly ionized particle current (mA) Jb = beam current (mA) jb = beam current density (mA/cm) Mt = target molecular mass (amu) q = electronic charge unit (1.6×10 Coulombs) R(α) = mass accumulation rate (gm/s) Rarm = radial position of Faraday probe measured from the motor’s axis of rotation (cm) Rbeam = radial position from the ion beam’s central axis (cm) rqcm = distance of QCM from target center (cm) Va = accelerator (accel) grid potential (V) VD = discharge voltage (V) * Graduate Research Assistant, Mechanical Engineering Department, kaptkz@engr.colostate.edu. † Assistant Professor, Mechanical Engineering Department, johnw@engr.colostate.edu. ‡ Graduate Research Assistant, Mechanical Engineering Department, daisyw@engr.colostate.edu. § Assistant Professor, Mechanical Engineering Department, ayalin@engr.colostate.edu
17
Angular Distribution of Sputtered Material
G. K. Wehner, Duane Rosenberg · Journal of Applied Physics · 1960 · 204 citations
The influence of surface roughness on the angular dependence of the sputter yield
M. Küstner, W. Eckstein, V. Dose et al. · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · 1998 · 133 citations
Natural Sciences, Materials Engineering, Materials Science +16