Energies · 2021 · 70 citations · 80 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsEnergy MaterialsSemiconductor MaterialsCarrier TransportPerovskite MaterialsPhotovoltaic MaterialsSemiconductor InterfacesSolar Cell MaterialsSolar CellsAbsorber MaterialsDefect ToleranceElectron Transport LayersElectron Transport SimulationHole TransportHole Transport LayersInterface DefectsPerovskite Solar Cells
An ideal n-i-p perovskite solar cell employing a Pb free CH3NH3SnI3 absorber layer was suggested and modelled. A comparative study for different electron transport materials has been performed for three devices keeping CuO hole transport material (HTL) constant. SCAPS-1D numerical simulator is used to quantify the effects of amphoteric defect based on CH3NH3SnI3 absorber layer and the interface characteristics of both the electron transport layer (ETL) and hole transport layer (HTL). The study demonstrates that amphoteric defects in the absorber layer impact device performance significantly more than interface defects (IDL). The cell performed best at room temperature. Due to a reduction in Voc, PCE decreases with temperature. Defect tolerance limit for IL1 is 1013 cm−3, 1016 cm−3 and 1012 cm−3 for structures 1, 2 and 3 respectively. The defect tolerance limit for IL2 is 1014 cm−3. With the proposed device structure FTO/PCBM/CH3NH3SnI3/CuO shows the maximum efficiency of 25.45% (Voc = 0.97 V, Jsc = 35.19 mA/cm2, FF = 74.38%), for the structure FTO/TiO2/CH3NH3SnI3/CuO the best PCE is obtained 26.92% (Voc = 0.99 V, Jsc = 36.81 mA/cm2, FF = 73.80%) and device structure of FTO/WO3/CH3NH3SnI3/CuO gives the maximum efficiency 24.57% (Voc = 0.90 V, Jsc = 36.73 mA/cm2, FF = 74.93%) under optimum conditions. Compared to others, the FTO/TiO2/CH3NH3SnI3/CuO system provides better performance and better defect tolerance capacity.
80
Constantinos C. Stoumpos, Christos D. Malliakas, Mercouri G. Kanatzidis · Inorganic Chemistry · 2013 · 5.4K citations
Surface passivation of perovskite film for efficient solar cells
Qi Jiang, Yang Zhao, Xingwang Zhang et al. · Nature Photonics · 2019 · 4.7K citations
Natural Sciences, Materials Engineering, Materials Science +16
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jaeki Jeong, Minjin Kim, Jongdeuk Seo et al. · Nature · 2021 · 3.1K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14