2021 · 15 citations · 5 references
EngineeringCommunicationElectrical EngineeringLow-power DesignMicroelectronicsWireless CommunicationsCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyHigh-frequency Power ConversionMillimeter-wave CommunicationsModulationWireless Power TransferGainLow-power Wireless CommunicationPassband DesignPower GainPower OutputRadio Frequency TransceiversTransceiver ArchitecturesTransceiver Design
A bidirectional transceiver front-end in 28 nm bulk CMOS is presented. A transformer-based T/R switch is used to minimize the area occupation without reducing the linearity and the isolation between the transmitter and receiver paths. The transmitter shows a power gain of 19 dB and an output-referred P <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</inf> of 14 dBm. At the 1 dB compression point the PAE is 18.7%. With a 100 MHz 64-QAM OFDM modulated input signal, the EVM is below 5% up to an average output power of 6.6 dBm, with a corresponding PAE of 7%. The receiver has a minimum NF of 4.9 dB, a voltage gain of 17 dB and an IIP3 of -9.2 dBm, while consuming 35 mW. Both TX and RX feature a very wide passband from 22GHz to 31GHz.
5
Hong-Teuk Kim, Byoung-Sun Park, Seong-Sik Song et al. · IEEE Journal of Solid-State Circuits · 2018 · 241 citations
Engineering, Computer Engineering, Electrical Engineering +17