Bioactive Materials · 2021 · 18 citations · 17 references
Natural SciencesMaterials EngineeringMaterials ScienceBiocompatibilityBiomaterialsMetallic MaterialsBiodegradable BiomaterialsMagnetic Thin FilmsMetallic BiomaterialsMetalsBiodegradable Metallic MaterialsBiodegradable MetalsMetal BiocompatibilityMetal Thin FilmsMetallic Stent Design
In this exploratory work, micrometric radiopaque W-Fe-Mn-C coatings were produced by magnetron sputtering plasma deposition, for the first time, with the aim to make very thin Fe-Mn stents trackable by fluoroscopy. The power of Fe-13Mn-1.2C target was kept constant at 400 W while that of W target varied from 100 to 400 W producing three different coatings referred to as P100, P200, P400. The effect of the increased W power on coatings thickness, roughness, structure, corrosion behavior and radiopacity was investigated. The coatings showed a power-dependent thickness and W concentration, different roughness values while a similar and uniform columnar structure. An amorphous phase was detected for both P100 and P200 coatings while -Fe, bcc-W and W 3 C phases found for P400. Moreover, P200 and P400 showed a significantly higher corrosion rate (CR) compared to P100. The presence of W, W 3 C as well as the Fe amount variation determined two different microgalvanic corrosion mechanisms significantly changing the CR of coatings, 0.26 0.02, 59.68 1.21 and 59.06 1.16 m/year for P100, P200 and P400, respectively. Sample P200 with its most uniform morphology, lowest roughness (RMS = 3.9 0.4 nm) and good radiopacity (~6%) appeared the most suitable radiopaque biodegradable coating investigated in this study.
17
Advances in Fe-based biodegradable metallic materials
Jin He, Fengli He, Dawei Li et al. · RSC Advances · 2016 · 122 citations
Natural Sciences, Materials Engineering, Materials Science +17