Case Studies in Thermal Engineering · 2021 · 19 citations · 24 references
EngineeringMechanical EngineeringHeat TransferThermodynamicsTransport PhenomenaHeat ExchangeHeat ExchangersHeat FlowHeat Transfer AnalysisHeat Transfer In FluidsThermal Boundary LayersBoundary Layer DevelopmentFriction FactorHeat Transfer EnhancementHeat Transfer MechanismsHeat Transfer RateLaminar Flow Heat TransferNusselt NumberThermal Boundary Layer Development
Experiments were performed to study the thermohydraulic behaviors of heating tubes equipped with serrated-ring bundles as turbulators. Their thermohydraulic characteristics are reported in terms of Nusselt numbers (Nu) and friction factors (f) as well as performance in terms of a thermohydraulic performance index (TPI) at identical pumping power. Influences of serrated-ring diagonal angles (θ = 15°, 30°, 45° and 60°), pitch ratios (PR = 6.0, 8.0 and 12.0) and Re were examined. Various geometries of serrated-ring bundles can affect the laminar sub-layer disruption, creating a reversing flow, reconnecting the separated flow to the surface, and delaying the thermal/velocity boundary layer development. These are the most important mechanisms that lead to enhanced force convection heat transfer in a fluid flow. The heat transfer rate, friction loss and TPI increased with decreasing pitch ratio (PR) and serrated-ring diagonal angle (θ ). Heat transfer rate and friction factor were increased to 2.2 and 8.8 times that of a plain tube, respectively. Over the range investigated, the highest TPI, 1.16, was found using a serrated-ring bundle having θ = 15° and PR = 6.0 at Re = 4000.
24
Vichan Kongkaitpaiboon, K. Nanan, Smith Eiamsa–ard · International Communications in Heat and Mass Transfer · 2010 · 160 citations
Vichan Kongkaitpaiboon, K. Nanan, Smith Eiamsa–ard · International Communications in Heat and Mass Transfer · 2010 · 136 citations