IEEE Transactions on Industry Applications · 1993 · 83 citations · 3 references
EngineeringElectrical EngineeringMechanical EngineeringElectric MachinesMotor ControlVibrationControl SystemsControl TheoryController DesignDrive SystemsElectric DrivesVibration ControlDrive Control SystemsDrive System DynamicsMotor Speed ControlObserver-based CompensationResonance FrequenciesRobust Speed ControlShaftsState Observer Design
A scheme is presented for the speed control of rolling mill drives. The proposed speed controller is based on a two-degree-of-freedom (TDF) structure and uses an observer-based state feedback compensator for the major control loop. The control method yields a robust system with respect to system uncertainties and modeling errors and is very effective for vibration suppression. Experimental verification was carried out on a prototype rolling mill minimodel system. The experimental drive system has a three-mass-model structure (motor-gear-load) connected by low stiffness shafts. The mechanical resonances and the inertia ratios between the motor, gear, and load are comparable to those of an actual rolling mill system (resonant frequencies are at 17.4 Hz and 51.3 Hz). The proposed scheme was compared to the conventional PI controller and the performance of each scheme is presented. A high closed loop speed bandwidth was obtained with the proposed TDF speed controller.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
3
Tsutomu Ohmae, Toshihiko Matsuda, Minoru KANNO et al. · IEEE Transactions on Industry Applications · 1987 · 50 citations
Engineering, Mechanical Engineering, Mechatronics Engineering +17