Case Studies in Construction Materials · 2021 · 18 citations · 17 references
EngineeringEnvironmental EngineeringWaste ManagementWastewater TreatmentWater TreatmentSludge DisposalSludge HandlingSludge ManagementSludge Resource RecoverySludge TreatmentWaste TreatmentLightweight ConcreteLightweight MaterialsResource Recovery From Sewage SludgeSewage Sludge TreatmentSludge CharacterizationSludge FormationUnit WeightWastewater Sludge Management
The increasing population have resulted in a higher generation of domestic and industrial wastewater sludge. The sludge ends up as a landfill in designated areas which makes the land unusable. The search for lightweight materials for construction has led to the use of sludge as a viable replacement for the basic composition of concrete due to its low density. The dry sludge collected from Polokwane Waste Water Treatment Works (WWTW) in Limpopo Province was used as a partial replacement of sand in concrete. The sludge content in the sand was varied from 2.5, 5, 7.5, 10, to 12.5 %. The outcomes of the analysis indicate that the partial replacement of sand with dry sludge in the concrete mix is viable and useful. The result showed that up to 7.5 % of sand could be replaced with dry sludge in concrete for structural applications. Also, wastewater can be used as a curing medium. The unit weight of the concrete decreased with increasing sludge content, which was attributed to the lower density of the sludge. The SEM image revealed a porous nature and irregular surface morphology of the sludge and the concrete.
17
[Trace elements, human nutrition and health].
Malbohan Im, L Fialová · PubMed · 1997 · 1.3K citations