Localization of different types of organoclay montmorillonite in the compatibilized polyamide 6/carboxylated acrylonitrile butadiene rubber nanocomposites: Morphology and rheological properties

Abstract

Abstract In this study, nanocomposites based on polyamide 6/carboxylated acrylonitrile butadiene rubber (PA6/XNBR) reinforced by the clay montmorillonite (OMMT) (Cloisite 20A and Cloisite 30B) were prepared by melt mixing. Glycidyl methacrylate‐grafted XNBR (XNBR‐g‐GMA) compatibilizer was used for immiscible blends of PA6/XNBR. The results illustrated that OMMT wanted to be selectively present in the more hydrophilic PA6 phase. Also, by adding the XNBR‐g‐GMA compatibilizer and increasing OMMT content, tensile strength, rheological and dynamic mechanical properties of the nanocomposites improved. According to transmission electron microscopy (TEM) images, a few layers of OMMT (Cloisite 20A) in the XNBR‐g‐GMA compatibilizer phase was observed. The results of X‐ray diffractometry and TEM analyses demonstrated that the formation of intercalated or exfoliated structures for both types of OMMT nanocomposites. In end of all analysis was found PA6/XNBR reinforced by the Cloisite 30B could be substantially improved by adding XNBR‐g‐GMA as a compatibilizer when compared to those reinforced by Cloisite 20A.