Methodology for Resloping of Rock Slope Using 3D Models from UAV-CRP Technology

Abstract

Assessing the stability of rock slopes is essential to ensuring the typical performance of adjacent transportation infrastructures but simulating the existing field topography and boundary conditions for stability analysis is challenging. This paper describes a case study in which highly weathered rock slopes adjacent to a railroad track in Texas were analyzed using close-range photogrammetry data obtained from an unmanned aerial vehicle with close-range photogrammetry (UAV-CRP). A highly weathered rock mass with low intact strength was considered as a single continuum that undergoes circular failure and was analyzed using Spencer’s two-dimensional (2D) and three-dimensional (3D) limit equilibrium method (LEM) analyses. A 3D critical slip surface was obtained to identify the critical sections on which to conduct the individual 2D stability analysis and obtain a safe resloping angle. These angles were further used to reslope the whole rock slopes and conduct a 3D analysis to arrive at a safe and economic slope angle for each side of the rock-cut. The realistic geometrical slopes developed from the aerial imagery were used to develop a framework for comprehensively analyzing the stability of a rock slope undergoing circular failure.