Applied Organometallic Chemistry · 2021 · 25 citations · 51 references
Natural SciencesChemical EngineeringMaterials ScienceCatalysisReaction EngineeringSurface ScienceCarbon Dioxide UtilizationCatalyst CharacterizationCatalyst DesignCatalyst PreparationCatalytic MaterialsCatalytic Reaction EngineeringCarbon Dioxide HydrogenationCatalyst DevelopmentCatalyst Performance EvaluationCatalytic ActivityCatalytic Process OptimizationSpecific Surface AreaSpecific Surface Area AnalysisSurface Area
Developing efficient catalysts for direct CO 2 hydrogenation to fuel hydrocarbons is of great significance for the effective utilization of CO 2 , and C 5+ selectivity is one critical indicator for the process economics. In this work, a series of K‐promoted Fe/CNT catalysts were prepared by the co‐impregnation method, and their catalytic performance for CO 2 hydrogenation was studied in a slurry‐bed reactor. As a result, CO 2 conversion and C 5+ selectivity showed positive correlation with the increase of K/Fe ratio from 0 to 0.3, but further increase of K/Fe ratio above 0.3 slightly affected its. The catalyst with a K/Fe molar ratio of 0.3 achieved the best performance with CO 2 conversion of 23.7% and C 5+ selectivity of 56%. In addition, the structure–activity relationship of the catalyst was discussed based on various characterization results. K‐modified catalysts presented a higher specific surface area and stronger CO 2 chemisorption, which helped to improve CO 2 conversion and C 5+ selectivity. However, excessive potassium loading caused a loss of specific surface area, reduction degree, and graphitization degree of the catalyst, which inhibited the CO 2 chemisorption and the formation of C 5+ hydrocarbons.
51