ACS Applied Materials & Interfaces · 2021 · 47 citations · 47 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryMaterials ChemistrySurface ChemistryAtomic Layer DepositionBattery MaterialsElectrochemical Energy StorageElectrode MaterialsElectrode-electrolyte InterfacesIon-conducting MaterialsElectrode CoatingsLithium-ion BatteriesLithium-ion Battery Electrodes Based On Metal OxidesLithium-ion Battery MaterialsLithium-ion ConductorsSurface DepositionSurface Storage CapacityThin-film Batteries
LiNi0.5Mn1.5O4 (LNMO) is a promising 5V-class electrode for Li-ion batteries but suffers from manganese dissolution and electrolyte decomposition owing to the high working potential. An attractive solution to stabilize the surface chemistry consists in mastering the interface between the LNMO electrode and the liquid electrolyte with a surface protective layer made from the powerful surface deposition method. Here, we show that a 7400 nm thick sputtered LNMO film coated with a nanometer-thick lithium-ion-conductive Li3PO4 layer was deposited by the atomic layer deposition method. We demonstrate that this “material model system” can deliver a remarkable surface capacity (∼0.4 mAh cm–2 at 1C) and exhibits improved cycling lifetime (×650%) compared to the nonprotected electrode. Nevertheless, we observe that mechanical failure occurs within the LNMO and Li3PO4 films when long-term cycling is performed. This in-depth study gives new insights regarding the mechanical degradation of LNMO electrodes upon charge/discharge cycling and reveals for the first time that the surface protective layer made from the ALD method is not sufficient for long-term stability applications.
47
Electrode Degradation in Lithium-Ion Batteries
Joshua P. Pender, Gaurav Jha, Duck Hyun Youn et al. · ACS Nano · 2020 · 826 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17